Welcome to Sorkin Computer Wireless Network
To properly connect to Sorkin Computer Wireless, your network settings need to be properly set as well as your browser settings. Since most systems are already setup properly, and since you are reading this page, then you do not have to change anything.
Just for completeness, This is what your network settings should look
like.
In Windows 95/98, get to this control panel from "Start/settings/control
panel/network".
In Windows XP/2000, get to this control panel from "Start/control
panel/network connections", then right click on the "Local Area Connection",
and select "properties".
Click here
to jump down to this section.
- You may have to scroll down the list to see the "TCP/IP -> " property. Your screen may look different.
- Highlight the "TCP/IP -> Lan adapter" property, and click on the "Properties" button.
- The "Obtain an IP address automatically" should be selected, as shown. Click on ok to exit if you needed to make any changes.
- After you open the network connections folder, right click on the Local Area Connection.
- Select properties and scroll down to Internet Protocol (TCP/IP)
- Press the "Properties" button and make sure that your settings look like this.
- That all you have to do.